Differences

This shows you the differences between two versions of the page.

--- rpios [2025/06/06 13:49] – assa
+++ rpios [2025/06/06 19:31] (current) – [SDR++] assa
@@ Line 23: / Line 23: @@
 To do so, run ''sudo raspi-config'' and go to //Advanced Options > Wayland// and choose //Wayfire//, then reboot. The display should now be recognized and work automatically. \\
 Use the Screen Configuration application to configure the orientation and arrangement.
+===== SDR++ =====
+It is recommended to install SDR++ by compiling it from source.
+Do the following:
+<code>
+# Install dependencies
+sudo apt install git cmake libfftw3-dev libglfw3-dev libvolk2-dev libglew-dev portaudio19-dev libzstd1 libzstd-dev libairspyhf-dev libiio-dev libad9361-dev libairspy-dev librtlsdr-dev libcodec2-dev librtaudio-dev libhackrf-dev
+# Download the code
+cd ~/Downloads
+git clone https://github.com/AlexandreRouma/SDRPlusPlus.git
+# Build
+cd SDRPlusPlus
+mkdir build
+cd build
+cmake ..
+make -j4
+# Install
+sudo make install
+</code>
+You can now run SDR++ from the applications' menu or from the terminal with ''sdrpp''.\\
+Make sure you're connected to the bluetooth speakers or any other audio device. In SDR++, scroll down to the Sinks tab, make sure the right audio device is selected, and set the bitrate to 44100.